I2C QUESTION2

[WHUNG.JOHN]

HI!I am a student!
i am writted my homework about i2c use!
but i test my written code,always find a question,
please everbody can teach my ,question exp:
*************************************************************
slave here:

#include <16F77.h>
#use delay(clock=4000000)
#fuses XT,WDT
#include "lcd.c"
#use i2c(SLAVE,address=0XA0,sda=PIN_C4,scl=PIN_C3,slow)

INT8 GG;

void main()
{
int i;


WHILE(!I2C_POLL())
{
GG=i2c_read();
BREAK;

}
LCD_INIT();
DELAY_MS(200);
LCD_GOTOXY(1,1); PRINTF(LCD_PUTC,"\fGG=%d",GG);
}
***********************************************************
master here!
#include <16F77.h>
#use delay(clock=4000000)
#fuses XT,noWDT
#use i2c(Master,sda=PIN_C4,scl=PIN_C3,slow)


int8 dk;


void main()
{

while(1)
{
i2c_start();
i2c_write(0xA0);
i2c_write('a');

i2c_stop();
i2c_start();
i2c_write(0xA1);
dk=i2c_read();
i2c_stop();
output_high (PIN_B7);
DELAY_MS(1000);
output_LOW (PIN_B7);
//IF (DK==9)
// {BREAK;}
}
}
***************************************************
i find lcd panel display a number (-96)
and i master want to send a english word .exp "A"
i must how written it . thks
i dont find question or variant code error area,
please everone can teach me ,thks

[PCM programmer]

There is no need to start a new thread every time you have another
question on i2c. I answered your question in the original thread just
two minutes ago.

[cjusto]

Hi! the -96 you got, is the adress.


u should read the next byte received from the i2c bus.

[whung.john]