CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
PIC18F45J10 wrong flashsize & wrong timer0/3 up to V3.24

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
Guest
PIC18F45J10 wrong flashsize & wrong timer0/3 up to V3.24
PostPosted: Tue Jul 18, 2006 9:15 am     Reply with quote
Hi,

the device PIC 18F45J10 is unusable, the flashsize is with 8KWords only the half real size (16KWords), Timer3 is not avaible and wrong defines for TIMER0 (prescale, 8/16switch,...)

the PIC18F25J10 has the right flash size, defines for timer0/3 is wrong...
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue Jul 18, 2006 6:01 pm     Reply with quote
If you have PCWH, it's possible that you can fix at least some of
these problems by editing the PIC's attributes with the Device Editor.
Screenshot:
http://www.ccsinfo.com/images/content/device_editor.gif
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group