CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Microchip USB CDC with PCW

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
PetrolDave



Joined: 23 May 2006
Posts: 3
Location: Fordingbridge, Hampshire U.K.

View user's profile Send private message Visit poster's website

Microchip USB CDC with PCW
PostPosted: Thu Jun 08, 2006 7:24 am     Reply with quote
I'm trying to compile the Microchip USB CDC software (Application Note AN956) using the CCS PCW compiler - without any success.

I get lots (>100 error messages) for what appears to be 2 main reasons (though I could be totally wrong about this) - case insensitivity (e.g. byte being seen by the CCS compiler as the saem as BYTE), and not recopgnising certain directives like rom.

Has anyone come across this problem and solved it?

I'm pulling my hair out .......
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Thu Jun 08, 2006 9:58 am     Reply with quote
The reason is that the code was written for the Microchip C18 compiler. Solution: Use the ex_usb_serial.c or ex_usb_serial2.c example.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group