CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
LCD display

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
rahul
Guest
LCD display
PostPosted: Thu Mar 16, 2006 8:03 am     Reply with quote
hello,
I am getting a 8 bit input from a wireless system onto a PIC chip.This 8 bit input is being sent by another PIC16F874 chip to a wireless transmitter and then to a wirless receiver.(there are encoders and decoders too)

Wireless receiver sends this 8 bit input to PIC16F874 chip and this is to displayed on 2*16 HD44780 LCD display.

I will be really grateful if someone can help me do the coding for the PIC chip which recieves 8 bit input and displays it on LCD(especially main() to receive input and display it on LCD)
Sincerely,
Rahul
P.S.-Here are the datasheets
http://www.linxtechnologies.com/documents/TXM-xxx-LR_Manual.pdf Data sheet for Transmitter

http://www.linxtechnologies.com/documents/RXM-xxx-LR_Manual.pdf Data sheet for Receiver

http://www.rentron.com/Files/ht-640.pdf Data sheet for Encoder
http://www.rentron.com/Files/ht-648l.pdf Data sheet for Decoder
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group