CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
RS232 read, write string simulation

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
RS232 read, write string simulation
PostPosted: Sat Feb 25, 2006 3:48 pm     Reply with quote
Hello,
i am new ccs, I need a good code for reading and writing rs232 and also i wnat to know the use of '#use rs232' and its parameters. Can anybody help me. How can i simulate reading in above case
Thanx
Guest
PostPosted: Sat Feb 25, 2006 3:52 pm     Reply with quote
Sorry, i din't mention anything about chip
I want to use PIC16F877A
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sun Feb 26, 2006 3:18 pm     Reply with quote
Quote:
i am new ccs, I need a good code for reading and writing rs232
and also i want to know the use of '#use rs232' and its parameters

Download the CCS manual and look in the section on "#use rs232".
It explains the parameters:
http://www.ccsinfo.com/download.shtml#CompilerManual


Quote:
How can i simulate reading in above case ?

This thread explains how to use MPLAB simulator with the hardware UART:
http://www.ccsinfo.com/forum/viewtopic.php?t=23408
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group