CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
3.249 set wrong soft uart speed!?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Honken69
Guest
3.249 set wrong soft uart speed!?
PostPosted: Mon Apr 24, 2006 6:28 am     Reply with quote
Hi,

I found that version 3.249 set wrong soft uart speed.

When I define speed to be 10400 it gets 10100!!

so I need to set it to 10700 baud...

Do anyone else seen this problem with 3.249?

Honken
Honken69
Guest
PostPosted: Mon Apr 24, 2006 7:07 am     Reply with quote
found the problem.... the internal oscillator was running about 2,4% to slow!!

an calibration rutine to fixed the problem ...

Very Happy
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group