CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Combining Tiny Bootloader with my code

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
bluzman2004



Joined: 28 Dec 2004
Posts: 2

View user's profile Send private message

Combining Tiny Bootloader with my code
PostPosted: Fri Jan 06, 2006 7:57 am     Reply with quote
Has anyone tried to add the Tiny Bootloader to thier hex file so that it can be all loaded at one time. I need to be able to program one Hex file and have the bootloader intact.
I love the Tiny Bootloader and am currently finishing a Visual Basic program of my own to program it with. I don't know if anyone has done this or not before either.
Sophi



Joined: 14 Jun 2005
Posts: 64

View user's profile Send private message

PostPosted: Fri Jan 06, 2006 11:05 am     Reply with quote
What's the difference between a bootloader (definition:" A bootloader is used to quickly download a new program into your PIC micro, in a few seconds.") and using ICProg or PonyProg...or are they bootloaders too?
Sophi
jecottrell



Joined: 16 Jan 2005
Posts: 559
Location: Tucson, AZ

View user's profile Send private message

PostPosted: Fri Jan 06, 2006 11:15 am     Reply with quote
Bootloaders allow programming via a RS232 connection with the PIC and not through the ICSP B6/B7 pins.

Google and read about them, they can be quite handy for client installed firmware updates.

John
asmallri



Joined: 12 Aug 2004
Posts: 1634
Location: Perth, Australia

View user's profile Send private message Send e-mail Visit poster's website

PostPosted: Fri Jan 06, 2006 9:21 pm     Reply with quote
jecottrell wrote:
Bootloaders allow programming via a RS232 connection with the PIC and not through the ICSP B6/B7 pins.
John


You can have multiple flavours of bootloaders technologies including RS232, RS485, SPI, Ethernet, USB...
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group