CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
DS1990 no reading using touch.c

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
williamho
Guest
DS1990 no reading using touch.c
PostPosted: Wed Sep 21, 2005 6:40 am     Reply with quote
Hi,
I am using 18F458 and picdem 2 plus.

B0 is connected to +5V through a 4.7k resistor, from probe one wire is connected to B0 and another wire is connected to Ground.

with Ex_touch.c, i only can see "Waiting for a touch device..." via hyperterminal. No result shown if iButton touch the probe.


Can anyone help?

Thanks.
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Wed Sep 21, 2005 6:56 am     Reply with quote
And exactly why are you double posting? Here is some code that might help
Code:

  while ( Read_Forum_Policy() == FALSE);
  while ( Follow_Forum_Policy() == FALSE);
  if ( Double_Post( WITHIN_1HOUR_14_MINS) == TRUE )
   Get_No_Help_From_Mark();
  else
    Mark_Will_Help();
 

Razz
williamho
Guest
PostPosted: Wed Sep 21, 2005 7:02 am     Reply with quote
understand, sorry.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group