CAN and 18f258

[troky2001]

Hi all,

I am trying to make CAN message sniffer based on 18f258 and max13050 can interface.
I am using example code from PICC 3.227 adjusted to work at 40MHz but still can't see any messages.

My baud settings are (500kbps):
BRGCON1=0x03;
BRGCON2=0x98;
BRGCON3=0x03;

Are these values ok? Should I change anything else in source expect #delay...?

Thanks,
Troky

[PCM programmer]

[troky2001]

Thanks for tips. I'll try tomorrow and post results.