Microchip Zigbee stack Conversion

mrmclean · Joined: 18 Dec 2004 Posts: 1

Just ordered the picdem-Z zigbee development kit. I noticed that their zigbee stack will only compile with the C-18 and Hi-tech complier (inferior). So is anyone out there trying to convert this stack?? If not I guess I'll be the guinee pig (oink).

One other thing, the CCS site has code that can modify my old ICD to program PIC18's - has anyone used this??

Thanks

Guest · Posted: Sat Dec 18, 2004 7:33 am

libor · Joined: 14 Dec 2004 Posts: 288 Location: Hungary

I am also interested in converting the Zigbee stack to CCS C. I have not yet received my Picdem-Z kit, so I have not yet started doing it.
Unless somebody shares his converted CCS source code till I get my dev.kit, I'll do it myself. (and I would be willing to share it) So please keep this topic up to date.

Mark · Joined: 07 Sep 2003 Posts: 2838 Location: Atlanta, GA

Guest · Posted: Sat Dec 18, 2004 2:09 pm

MpZbee v0.9.02

===================
Known Issues:
===================
1. Range is only about 5-10 feet. Shocked

This is a hardware issue, resolutoin
is in progress.

blak3r · Joined: 11 Jan 2004 Posts: 45

Several months ago people were talking about converting this code when the eval. kits came in.

Has anyone converted this code yet? If you have please post it.

Thanks,
~blake
_________________
"Everything should be made as simple as possible, but not one bit simpler" -- Albert Einstein

http://www.blakerobertson.com