View previous topic :: View next topic |
Author |
Message |
Guard
Joined: 20 Jan 2005 Posts: 43
|
CCS C and ASM |
Posted: Fri Mar 18, 2005 9:23 am |
|
|
HI,
Why CCS doesn't recognized "db" asm opcode?
Thank |
|
![](templates/subSilver/images/spacer.gif) |
dyeatman
Joined: 06 Sep 2003 Posts: 1924 Location: Norman, OK
|
ASK CCS |
Posted: Fri Mar 18, 2005 10:07 am |
|
|
WE are just a user forum, not CCS tech support.
I would suggest you send them a message and ask them. |
|
![](templates/subSilver/images/spacer.gif) |
Ttelmah Guest
|
|
Posted: Fri Mar 18, 2005 10:10 am |
|
|
Why should it?.... :-)
Remember this is it's own assembler, with it's own syntax. It still supports 'C' form data definitions, rather than straight assembler. Forget about the MicroChip assembler defintions when using this.
Seriously, it is an area where better definitions of the real syntax, would be very helpful.
The #ROM directive, allows you to put data in a memory area, like DB, but supports any data type.
Best Wishes |
|
![](templates/subSilver/images/spacer.gif) |
|