| View previous topic :: View next topic |
| Author |
Message |
Guest
|
| MPLAB and Silicon Rev. |
 Posted: Thu Oct 14, 2004 11:53 am |
 |
|
I was told (by Microchip) with ICD-2 and the latest rev. of MPLAB it is now possible to find the Silicon Rev. for the connected chip, but did not think to ask how or where on the menu's that feature is to be found. .
I've searched the menu's and dialogs in MPLAB V6.62 and cannot find anything that looks like Silicon rev. Sure I could have missed it.
Has anyone been able to retreive silicon rev. with MPLAB V6.62 and ICD-2 ?
If MPLAB can do it can it also be done with ICD-U40 ? |
|
 |
Mark
Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA
|
|
| Posted: Thu Oct 14, 2004 12:23 pm |
|
|
| Quote: |
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
Target Device PIC18F6720 found, revision = Rev 0x3
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
|
|
|
|
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Thu Oct 14, 2004 12:27 pm |
|
|
And there's nothing special about MPLAB 6.62. The thing
that Mark showed could be done with 6.42, and probably earlier. |
|
|
Guest
|
|
| Posted: Thu Oct 14, 2004 1:53 pm |
|
|
| Mark wrote: | | Quote: |
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
Target Device PIC18F6720 found, revision = Rev 0x3
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
|
|
Thanks, problem with trees and forrest...
I understand the latest version report the true silicon rev.
Notice here is says a4
Setting Vdd source to target
Target Device PIC18F6720 found, revision = a4
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
