Need help getting CLKOUT to work

[eyewonder300]

I'm using an 'F877 and would like to get the xtal clock freq (19.2MHZ) /4 from the CLKOUT (pin 14) to use in the circuit. I have used a logic probe to look for any output from the pin, and cannot see anything, nor will it drive the desired circuit.

I have used the below program just to verify that the PIC is actually running, and it is.

Can anyone point out what I'm doing wrong? Thanks

Steve


// ns_tst.c

////////////////////////////////////////////////////////////////////////

#include <16F877.H>
#FUSES RC,NOPROTECT,NOWDT,NOPUT,NOBROWNOUT,NOLVP,NOCPD,NOWRT
#use delay(clock=10000000)

#include "nep_hdr\nep_lcd.h"

//////////////////////////////////////////////////////////////////////////


main()
{
lcd_init();
lcd_putc("Hello, World!");
delay_ms(1000);
lcd_gotoxy(3,3);
lcd_putc("Goodby, World!");

}

[PCM programmer]

[eyewonder300]

Thanks, PCM. That simple change made it work.

Steve