ICD-U40 Pinout

bwhiten · Joined: 26 Nov 2003 Posts: 151 Location: Grayson, GA

I just received my ICD-U40 kit. I've done some searching here for the pinout of the modular target connector but have come up empty. Has anyone received a diagram of this from CCS or is there a location on there web site I can obtain it. Thanks again for any help.

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

It's in the FAQ -- see the first question in the Hardware section.
http://www.ccsinfo.com/faq/

Douglas Kennedy · Joined: 07 Sep 2003 Posts: 755 Location: Florida

You may need to launch icd.chm usually found in Program files/PICC directly. The problem is if you have a valid hook up with the ICDU to your target it will allow the launch of help from within PCW or ICD. The help would then show you the hook up but why would you need it since it would already by then be working! Since you don't have it hooked up you'll need to creep in through the back way and launch the help file manually by clicking on icd.chm. I and you thought Catch 22 only occurred in the movies.

bwhiten · Joined: 26 Nov 2003 Posts: 151 Location: Grayson, GA

That's it. Exactly what I was looking for. I passed right over the FAQs thinking no way it's in there Embarassed

Thanks again.