CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
I am thinking of building a software to program a pic.

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
leesing2k3



Joined: 08 Nov 2005
Posts: 28

View user's profile Send private message

I am thinking of building a software to program a pic.
PostPosted: Fri Sep 29, 2006 12:08 am     Reply with quote
I am thinking of building a software to program a pic. By using either com port or lpt. But i dont have any information of how a microchip is programmed.

Searching in google is hard since i dont even know what kind of keyword to use.....

Please supply me some information to study, your help is greatly appreciated.

Thank you in advance.
dyeatman



Joined: 06 Sep 2003
Posts: 1924
Location: Norman, OK

View user's profile Send private message

PostPosted: Fri Sep 29, 2006 3:08 am     Reply with quote
Try going to Microchip and looking at the datasheet for a PIC you will be programming. The programming information will be found there.
Also. look at the Microchip Application Notes.

www.microchip.com

Last edited by dyeatman on Fri Sep 29, 2006 2:34 pm; edited 1 time in total
Eugeneo



Joined: 30 Aug 2005
Posts: 155
Location: Calgary, AB

View user's profile Send private message

PostPosted: Fri Sep 29, 2006 3:12 am     Reply with quote
I got some hits with

pic programmer serial free download
Bart



Joined: 12 Jul 2005
Posts: 49

View user's profile Send private message

PostPosted: Fri Sep 29, 2006 2:35 pm     Reply with quote
Why you would do that ?

There exist an free exelent one here :

http://www.winpic800.com/index.php?lang=en

kind regards
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Fri Sep 29, 2006 2:58 pm     Reply with quote
Quote:
But i dont have any information of how a microchip is programmed.

Go to the Microchip Data Sheet Finder page:
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2046
Select your PIC in the drop-down box. When the page is loaded, look
on the lower right side for a link to the "Programming Specification".
It has all the information on how to program your PIC.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group